SR3608 Equipment Teaching Electrician Trainer Industrial PLC Unit
Product Manual
1. Product Overview
1.1 Overview
This training device is Siemens S7-1200CPU module. Through relevant
experiments, you can be familiar with the basic use and programming
methods of S7-1200 PLC, the use of programming software, etc.
Cultivate the corresponding knowledge and skills of students,
suitable for teaching and skills training and assessment of related
majors in vocational schools, vocational schools, secondary
vocational schools and technical schools.
1.2 Features
(1) All the input and output terminals of the PLC module are led
out to the panel through the transfer terminal, and connected with
the 2mm safety electrical cable.
(2) The PLC module selects Siemens PLC, provides digital input 8 in
14 output, analog input 6 in 2 output, supports RS232 and RS485
communication.
(3) The module is equipped with a DC 0-30V voltmeter.
(4) Equipped with 2 sets of analog DC0-10 output.
2. Performance parameters
(1) Input power: single-phase three-wire system 220V ± 10% 50Hz
(2) Dimensions: 297mm × 230mm × 80mm
(3) Total capacity: <500VA
(4) Weight: <100kg
(5) Working conditions: ambient temperature -10 ℃ ～ + 40 ℃ relative
humidity ＜ 85% (25 ℃)
3.1 Module power switch
The power switch can also indicate the power status.
3.2 Module digital input
The module contains 8 digital inputs, which can be connected to
signal input components such as buttons
3.3 Module analog input
The module contains 6 analog input points, which can be connected
to voltage analog signals or current analog signals.
3.4 Module DC24V output
The module contains a set of DC24V output, which can provide DC24V
power for the sensor.
3.5 Module DC0-30V voltmeter
The module contains a DC0-30V voltmeter, which can measure DC0-30V
voltage.
3.6 Voltage analog signal DC 0-10V output
This module contains 2 sets of DC 0-10V DC voltage analog signals,
which can be used as PLC DC voltage analog input signals.
3.7 RS232 communication module
This module contains RS232 communication module, which can be used
as PLC for RS232 communication.
3.8 RS485 communication module
The module contains RS485 communication module, which can be used
as PLC for RS485 communication.
3.9 Module relay output
The module contains 14 relay outputs, which can be connected to
relay outputs.
3.10 PLC
The overall exposed Plc module allows students to visually observe
the status of PLC input and output points.
3.11 Analog output
The module contains 2 analog input points, which can output voltage
analog signal or current analog signal.
3.12 supporting devices
(1) 1 communication line
(2) 1 CD of PLC programming software
(3) 25 pieces 2mm safety electrical cable
(4) 1 power cord
4. Can complete the training content
(1) Computer and PLC communication training
(2) PLC programming training
(3) Computer monitoring PLC status training
(4) PLC analog input training
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items |
