SM162 Educational Equipment Technical Teaching Equipment
Experimental Flume 309x450mm
1. Description
How does we achieve the necessary river depth for ships? How does
open-channel flow change during flooding? How far upstream do
measures such as control structures have an effect? How can the
discharge at barrages be By using experimental flumes in
laboratories it is possible to teach the basic knowledge required
to understand the answers to these questions and to develop
possible solutions.
The experimental flume with a closed water circuit has a
cross-section of 309x450mm. The length of the experimental section
is between 5m and – with further extension elements a maximum of
12,5m. The side walls of the experimental section All made that
tempered glass, which allows excellent observation of the
experiments. All components that come into contact with water are
made of corrosion-resistant materials (stainless steel, glass
reinforced plastic). The inlet element is designed so that the flow
enters the experimental Section with very little turbulence.
The inclination of the experimental flume can be finely adjusted to
allow simulation of slope and to create a uniform flow at a
constant discharge depth.
A wide selection of models, such as weirs, piers, flow-measuring
flumes or a wave generator are available as accessories and ensure
a comprehensive programme of experiments. Most models are quickly
and safely bolted to the bottom of the experimental section.
2. Technical details
Specification
Basic principles of open-channel flow
Experimental flume with experimental section, inlet and outlet
element and closed water circuit
Length of the experimental section 5m, up to 12,5m possible with
additional extension elements
Smooth adjustable inclination of the experimental section
Experimental section with 20 evenly spaced threaded holes on the
bottom for installing models or for water level measurement using
pressure
Side walls of the experimental section are made of tempered glass
for excellent observation of the experiments
Experimental section with guide rails for the possible available
instrument carrier
All surfaces in contact with water are made of corrosion-resistant
materials
Flow-optimised inlet element for low-turbulence entry into the
experimental section
Closed water circuit with 2 water tanks, pump, electromagnetic flow
sensor and flow control
Models from all fields of hydraulic engineering available as
accessories
2 tanks
Made of GRP
1100L each
Measuring ranges
Flow rate: 5,4...130m3/h
400V, 50Hz, 3 phases
400V, 60Hz, 3 phases
230V, 60Hz, 3 phases
UL/CSA optional
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
