ZM2188 Fluid Flows Study Bench Didactic Equipment Hydraulic
Workbench
The process principle diagram of measuring point location: 1. 2
ball valve is used to select the measuring section and 3 reflux; P
pressure, f flow
As the water flows through the pipe, the friction of the pipe wall
and water causes the pressure loss. The pressure loss is directly
dependent on the surface roughness of the inner wall of the pipe,
which is used in the material. In addition, the pressure loss is
caused by flow velocity and cross sectional area.
Four straight pipe elements are installed on the panel. These can
be selected individually by the ball valve, flow control valve into
use and yield and rotor flow meter reading.
The pressure measuring points in the piping system are designed as
annular cavity, which is located between the beginning and end of
the measurement part, ensuring accurate pressure measurement. The
sensor is connected to a differential pressure gauge and
corresponding to the differential pressure reading display.
The well-structured teaching materials provide a step-by-step guide
through experiments.
Learning goals/experiments:
• Research on pipeline pressure loss
• Different sections
• Effects of various pipe diameters
• Effects of different materials and surfaces roughness
• The impact of velocity
• The comparison between experiment and theory feature
* Pipe 1 pressure loss
* Different materials and diameters
The study bench allows the study of the linear and specific load
losses and the water flow visualization in different pipes’ types:
- Smooth tube.
- Rough tube.
- Venturi tube.
- Section increase and restriction.
- Industrial elbows.
The bench is composed of:
- Fluid supply reservoir in non-oxidizable material.
- Stainless steel Centrifugal pump with filter.
- Different control valves.
- Venturi tube.
- Diaphragm.
- Transparent smooth tube.
- Different industrial elbows.
- Section increase and restriction.
- Flow sensor.
- Tight and separate connections installed in different measurement
points.
- Direct display differential manometer.
- All the necessary accessories assuring the efficient functioning.
Power supply: 220V/380V/50Hz
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
