ZM8134 Gas Absorption Column Educational Equipment Fluids Engineering
Training Equipment
Description
Absorption is used to remove one or more gaseous components from a
gas flow using a solvent.First of all, a CO2 and air gas mixture is
produced. It is possible to adjust the mixing ratio using valves.
The flow rates of the gas components are displayed.
A compressor delivers the gas mixture into the lower section of the
absorption column. In the column, part of the CO2 is separated in
the counterflow with the solvent. Water is used as the solvent. The
CO2 is absorbed by the downward flowing water. To separate the
absorbed CO2, the charged water is then fed from the lower section
of the absorption column into a desorption column. As the pressure
is reduced and the temperature is increased, the solubility of the
CO2 falls. A heater heats the water. A water jet pump generates
negative pressure in the desorption column and causes the CO2 gas
to be emitted from the water. A pump then delivers the regenerated
solvent back into the absorption column.
The water temperature can be controlled. Flow rate, temperature and
pressure are continuously measured. The two-section column is
equipped with connections to determine the pressure losses. The
pressure loss in the respective sections can be displayed via two
U-tube manometers. To evaluate the success of the process, the
trainer includes outlets for taking gas and liquid samples. The gas
samples can be analysed using the hand-held measuring unit
supplied.
Specification
- separation of CO2/air mixture by absorption in counterflow with
water
- production of gas mixture using CO2 from compressed gas cylinder
and ambient air
- adjustment of mixing ratio using valves
- compressor for delivering the gas mixture into the absorption
column
- DURAN glass absorption column (packed bed) and desorption column
- continuous solvent regeneration in circuit with desorption column
under vacuum
- 1 pump for desorption column and 1 pump for returning solvent to
absorption column
- water temperature control with heater and refrigeration system
- refrigerant R513A, GWP: 631
Technical data
Absorption column
height: 2x 750mm, inner diameter: 80mm
Desorption column
height: 750mm, inner diameter: 80mm
2 pumps (absorption/desorption)
max. flow rate: 17,5L/min
max. head: 47m
1 pump (cooling)
max. flow rate: 29L/min
max. head: 1,4m
Compressor
max. positive pressure: 2bar
max. flow rate: 39L/min
Refrigeration capacity: 1432W at 5/32°C
Refrigerant: R513A, GWP: 631
filling volume: 600g
CO2-equivalent: 0,4t
Measuring ranges
flow rate:
0,2…2,4Nm3/h (air)
50…600L/h (solvent)
0,4…5,4L/min (CO2)
temperature: 1x 0…80°C, 2x 0…60°C
pressure: 1x 0…2,5bar, 1x -1…0,6bar
differential pressure: 2x 0…250mmWC
CO2-content: 0…100vol%
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 230V, 60Hz, 3 phases
UL/CSA optional
Dimensions and weight
LxWxH: 1920x790x2300mm
Weight: approx. 290kg
Required for operation
CO2 gas cylinder with pressure reducing valve
water connection, drain
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
