ZM8133 Reaction Turbine Unit Vocational Training Equipment Fluids
Engineering Experiment Equipment
Description
In reaction turbines, the static pressure of the working medium in
front of the rotor is higher than that behind it. In pure reaction
turbines with a degree of reaction of one, the entire pressure
energy in the rotor is converted to kinetic energy. This
compressed-air driven experimental unit can be used to understand
turbines powered by steam or water.
This is a single-stage, pure reaction turbine with a horizontal
shaft. The rotor of the turbine has four outlet nozzles and is
installed in a transparent housing. The air flows radially through
the rotor and expands and accelerates as it exits through the
outlet nozzles. The exiting air flow drives the turbine rotor
according to the reaction principle. A band brake is used to apply
a load to the turbine.
The inlet and outlet pressure at the turbine are indicated on
manometers. The turbine torque is determined by measuring the force
on the band brake. The speed is measured with an optical speed
sensor. Torque, speed and temperatures are digitally displayed. The
air flow rate is measured with a rotameter and set by means of a
valve.
The turbine is fitted with a solenoid valve as a safety device in
case of overspeed. The brake drum on the turbine shaft is cooled by
means of the compressed air.
Specification
- investigation of a compressed air driven radial reaction turbine
- transparent housing for observing the operating area
- rotor with 4 outlet nozzles
- application of load to the turbine by means of a band brake
- setting of the primary pressure with the pressure reducing valve
- valve and flow meter for setting the flow
- solenoid valve as a safety device to prevent overspeed
- determination of the torque on the turbine shaft using a force
sensor
- measurement of the turbine speed with an optical speed sensor
- manometer for displaying the pressure on the inlet and outlet side
- digital display of speed, torque and temperature
Technical data
Reaction turbine
max. power: 20W at 19000min-1
Rotor
diameter: 55mm
4 outlet nozzles, diameter: 1,5mm
Measuring ranges
temperature: -20…1100°C
speed: 0…30000min-1
torque: 0…10Ncm
flow rate: 25…315L/min
inlet pressure: 0…2,5bar
outlet pressure: 0…0,1bar
primary pressure: 0…10bar
230V, 50Hz, 1 phase
120V, 60Hz, 1 phase
Dimensions and weight
LxWxH: 900x370x750mm
Weight: approx. 35kg
Required for operation
Compressed air supply 6…10bar, max. 300L/min
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
