ZMH1108 PLC Electro Hydraulic Trainer Teaching Equipment Electro
Hydraulic Workbench
I.Introduction
It‘s suitable for schools, engineer training centers, factory
training department etc.
Through this trainer, students can master hydraulic components
structure, hydraulic circuit control theory, hydraulic circuit
design, and hand on ability for hydraulic trainer.
This trainer is flexible and students can design their own
hydraulic circuit.
II. Technical parameter
(1) DC power: input AC 380V,50Hz Output: DC 24V/3A
(2)Wheel: 4, 2 lockable with brake, 2 not lockable
(3) Hydraulic station:
nominal volume: 35L
rated output hydraulic pressure is 16MPa,
pump type: gear pump
(4) Slot space:25mm
(5) Panel material: aluminum
(6) Workbench type: single side two work station for 2 students
(7) Hydraulic station with hydraulic oil
(8) Whole equipment dimension:1600mm(L)×750mm(W)×1700mm(H)
(9)Aluminum panel dimension: 1200(L)×750(W)
(10)Cabinet: 1
III. Experiment that can be finished
1. Direction control circuit
(1)Hand operated direction valve direction change circuit
(2)Solenoid directional valve direction change valve
2. Pressure control circuit
(1)Single grade pressure adjust circuit
(2)Secondary pressure adjust
(3)Single grade pressure decrease circuit
(4)Secondary reduce pressure circuit
( 6)Use selector valve
(7)Use overflow valve
(8)pilot operated check valve protect voltage
3. Speed adjust circuit
(1)Oil inlet throttling governing
(2)Back oil circuit throttling governing
(3)By pass circuit throttling governing
(4)Speed adjust valve speed synchronizing circuit
(5)Speed adjust valve parallel circuit
(6)Speed adjust series circuit
5. Use sequence valve sequent circuit
6. Use stroke switch control sequent circuit
7. Use pressure relay control sequent circuit
8. Use pilot operated check valve single direction lock close
circuit
9. Use pilot operated check valve two directional close circuit
10. Use “O” type directional change valve close circuit
11. Relay control hydraulic basic circuit
12. Hydraulic component capacity measure experiment
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply
plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
