SR-HM305 Centrifugal Pump Vocational Training Equipment Fluids
Engineering Experiment Equipment
I. Description
Centrifugal pumps are turbomachines that are used for conveying
fluids. In centrifugal pumps, the head depends on the flow rate.
This dependency is understood to be the operating behaviour of the
pump and is represented in the characteristic diagram of the pump.
The trainer SR-HM305 is intended for experiments on the fundamental
behaviour of a hydraulic circuit. SR-HM305 is suitable for both
training in vocational colleges and for laboratory experiments in
higher education.
The equipment of the trainer includes a closed water circuit and a
powerful, standard centrifugal pump. Standard pumps are built
according to industrial standards. The standard defines rating
schemes and key dimensions so that standard pumps from different
manufacturers can be exchanged without replacing the piping and
ground plate.
The centrifugal pump is powered by a three-phase motor. The speed
can be adjusted to the desired value with the frequency converter.
An inductive, non-contact position encoder on the engine shaft
records the speed. The drive motor is mounted in a pendulum bearing
such that the drive torque can be measured with a force sensor and
the mechanical drive power can be determined.
Manometers display the pressure on the pump’s inlet and outlet. The
flow rate is measured with an electromagnetic flow rate sensor. The
flow rate can also be determined by means of a differential
pressure measurement on an orifice plate flow meter.
The speed, torque, and electrical power consumption of the pump and
the flow rate are shown on a digital display on the switch cabinet.
II. Specification
- examination of a standard centrifugal pump
- closed water circuit
- three-phase motor to power the pump with variable speed via a
frequency converter
- drive motor with pendulum bearing
- non-contact speed measurement at the engine shaft and force sensor
for measuring the drive power
- determination of the flow rate by using an electromagnetic flow
rate sensor, or an orifice plate flow meter and a differential
pressure measurement
- manometer at the inlet and outlet of the centrifugal pump
- digital displays for torque, speed, electrical power consumption
and flow
III. Technical data
- Centrifugal pump
- max. flow rate: approx. 15m3/h
- max. head: approx. 16m
- Drive motor with variable speed
- power output: 1,1kW
- speed range: 0…2400min-1
- Tank
- volume: 96L
Measuring ranges- pressure: 1x -0,6…0bar, 1x 0…2,5bar
- flow rate: 5…600L/min
- speed: 0…5000min -1
- torque: 0…10Nm
- power consumption: 0…2,2kW
- 230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
230V, 60Hz, 3 phases
Dimensions and weight
LxWxH: 2000x750x1480mm
Weight: approx. 215kg
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
